Offensive Support

This weekend I finished off some projects that had been on the back burner for the last couple of months. The first project was finishing off a pair of scratch-built US 4.2" mortars for Mr K. I used some mortar parts from a Battlefront M-113 sprue and some Esci sand bags to quickly bodge up something that roughly looks the part. I then neglected to paint them for around three months!

Foreground: US 4.2" Mortars. Background: 81mm Mortars.

The same as the picture above.

 The three 81mm Mortar teams are to go with the support weapons in my previous post. They are Pegasus WW2 Germans that has been crudely modified using a scalpel and liquid green stuff, and then given a rough paint conversion.

Crude but possibly effective.

Since there has been a trend towards having heavier mortars, I also converted some of the Pegasus WW2 German  120mm mortars and crew using the same methods.

120mm Mortars. A useful piece of indirect fire support.

The last piece of offensive support I finished off were four more 105mm Light Guns. Three of these are intended to replace the scratch built guns I made here. The forth gun will also replace one that had the barrel at a high angle and has been broken and repaired a couple of times this year.

105mm guns, made from the Airfix/JB Models kit.

A different view of the above.

 So all in all, a rather nice collection of offensive support elements!

A collection of mortars.

Support Weapons

It has been a while since I've made a post in the blog, but I haven't been idle! Here are some pictures of some figures I have recently finished painting.

The whole bunch.

GPMGs. Mix of Revell Modern British and Esci Modern Americans.

The .50cal is a Caesar Modern American, while the HMG and crew are Elhiem Modern Americans. 

 GMG and crew are Elhiem Modern Americans.

Javelin teams are Modern Australians from Wartime Miniatures.

In painting these I have made the deliberate decision not to attempt the multicam of the current NZ Army uniform, as previous efforts have once a wash has been applied become rather indistinct at at distance. The figures seem to pass muster without the extra detail so I am rather happy with the overall result.

Of Washes and Varnishes

 Over the last couple of years I have become a fan of using washes to pop the detail in figures and models, and make my efforts at painting just look better.

Washed and unwashed.

 My wash of choice has been the various recent iterations of GW brown wash. However, for projects that require lots of wash, this can be rather expensive.

After and before......

I had heard that using the Army Painter dip system could be cheaper - however it is rather thin on the ground in the wilds of my current locale. I had heard that a similar effect could be achieved by using a much cheaper product, but my research initially led only to products that weren't available in NZ.

Spot the difference. Models are all 1/72 Bravo Team M-3A2 Bradleys.

But a chance conversation with an Australian came up with the fact that some modelers over there were using a product available there in local hardware stores as a substitute for the Army Painter dip.

The answer - available for around NZ$20 at Mitre 10.

This refocused my efforts on rather than looking for a particular product, I should hunt for a type of product - a polyurethane stain and varnish - and experiment with that. The methodology was brutally simple paint it on straight out the can (Note: It is a little like molasses, so do a test vehicle first)

The results (so far) on around a dozen tanks, three dozen APCs, and about half a dozen buildings, have been positive. On figures - less so. But I have another experiment planned for that.....

Making M-113s Part One

I've been quite busy making a variety of bits of pieces of late, but have been rather slack in actually posting anything. A while back, I started work on some cardboard M-113s  (click here if you want to know more)

A mixture of Bravo Team ready mades (at rear), Esci (unpainted front left), and cardboard model M-113s

The Esci kit was missing a few key pieces that I replaced using the usual methods of bodging out of plastic card, or finding something about right in the bits box.

One of those road wheels is not like the others.....

A wheel and tire from a jeep or light truck is given a outer ring of plastic card in order to make a new road wheel.

The green hatch is a spare from the Airfix M-113 Fire Support Vehicle kit.

I still have three more of the Esci kits to build, and I plan to build them as the straight APC version without any additional stowage. With the cardboard models, I have tried to add clutter and stowage to the vehicles in order to try and disguise any shortcomings in the models, and to see if I could pass them off as vehicles used by support elements, rather than teeth elements, while still maintaining flexibility to use them as such as needed.

Esci vs. Cardboard.

I don't think I have really succeeded in doing this - at best I have made three M-113s that have a certain air of clutter to them. I suspect I need to put more stowage on them, and/or items of auxiliary equipment that will earmark the vehicle into a support role.

Needs more stowage.....

And the tracks aren't quite right....

I could have put more effort into the rear doors, but I figured this was good enough...

On the cardboard front I have benefited from the generosity of Paul from Plastic Warriors sending me three rather nice scratch-built APCs (click here for details)

Esci vs Cardboard part II.

Now for my purposes, these M-113s from Paul being a little large is not a problem, as an imagination background allows for the creation of plausible back stories that can explain away a number of sins.

The fact that there existed earlier APCs, such as the M-75 and the M-44 (click here for details). that were somewhat larger than the M-113, makes it easier to declare these to be a hitherto unknown vehicle of a similar ilk.

Spot the Esci!

That, or field them in force with no other M-113s!

Bergstiger to Gun Tiger

Another partwork magazine I have been collecting is Military Vehicles magazine (Which is rather a plain name, but quite descriptive of the contents). Issue three of the magazine (of which I bought some additional copies) offered a model M1126 Stryker and a model Bergetiger.

And all for under NZ$15 an issue.

Now, while having multiple model Strykers is very useful, having multiple models of a vehicle that most likely only one ever existed of, is somewhat less useful.

Tank and spare parts.

Fortunately, I had spare parts from one of the many different Tiger I kits put out by Hasegawa, and thus I had a solution for one of the extra Bergetigers. (One of the others I sent over to Paul at Plastic Warriors click here to see his post on it).

Useful spares.

The first step was to remove the crane and winch, which according to some (click here for more detail) is too small to use as a recovery vehicle, but was actually designed for use as a demolition charge layer. Other theories are discussed here.

And all gunned up.

I have of course kept one for use as a demolitions tank, or workshop tractor, or even an ARV!

Not BRDMs

Over the years I have found that Matchbox cars can be an excellent source of vehicles for wargaming. Sometimes all that is needed is a quick repaint, and sometimes a little more work is required to make them table ready.

More work required - the turret especially.

I got these vehicles from Frank, who was planning on adapting them for use as AFVs for his  Brotherhood of Nod army. The vehicles were from one of the new Matchbox Battle Kings packs which can provide useful vehicles, but they are generally repaints from the 1-75 car range, rather than bigger diecasts like the original Battle Kings range.

Not BRDM and a S-Model BRDM-2.

 The S-Model BRDM-2 kit comes with a number of spare parts. In fact the only difference between the 9P148 ATGM launcher version and the standard version, is the removal of one rather vital piece of sprue - the top deck for the standard version.

BRDM turret (left) and Puma turret (Right)

I had experimented with other possible turrets before deciding on the BRDM-2 turret. One of the other possible options was to use turrets from the Matchbox Puma kit. While it looks ok with the Puma turret, the BRDM-2 turret looks better.

And with the ATGM launcher.

 In converting one of the S-Models 9P148 vehicles into a standard BRDM-2, I had a spare top hull section that I figured could also work on one of the not BRDMs.

Pre and post modified vehicles.

 Of course, now that I have made these vehicles, I have to decide how I going to use them. I think they have a nice chunky tough feel to them, so I am thinking use in Dark Future style games, but potentially they could be used by a faction in Harad games - although it would be in ones set in the late 1990s (or even later).

Two notBRDMS and a Fallout style Hummer.

However, I am sure that now that I have started making them, I will be able to figure out a use for them.

Yet More Chieftains

Continuing on with my refurbishment of old Battle Kings, I have recently finished the refurbishment of another two tanks - this time with much better photos!

Trackless diecast meets plastic strapping.

 I describe the process of retracking one of the tanks in an earlier post here.

Headless tank commander meets pin and new head.

Close up of tracks.

The tank on the left is the one with the replacement parts.

Two more tanks ready to enter the fray.