105mm Light Guns - All Finished!

I've finished painting the scratch built 105mm guns I was working on in my last post. The initial plan was to use sections of Chux cloth to disguise elements of the build that were simplified for ease of rapid construction.

Three more painted 105mm guns.

 The Chux cloth proved to be too unwieldy, and too good at obscuring detail, that when I showed it to others, they suggested using bandage gauze instead (and even kindly supplied me with some:))

Comparison shot between the scratch builds and a actual model.

And while the bandage gauze certainly looks better, it is very fiddly to apply. The results are very promising, and certainly I hope to use the technique again in the future.

Side shot of the three guns.

 I have a few other scratch built guns that I think I am going to treat in a similar fashion using gauze to simulate netting over their position. I will try and layer the gauze to help create a more substantial netting effect.

Bandage gauze versus Chux cloth .

 If I make more scratch built 105mms, I will try and put some into sandbagged emplacements in order to add some variety to the stands - and obscure some more detail!

The three store bought models.

Overall I think they work well with the actual models, and their construction has proved to be interesting and enjoyable - two things that I think should be central to any hobby.

WIP Scratch-Building 105mm Guns

In my quest for obtaining another three L118 Light Guns (See previous post here) I remembered that the kit came with an additional gun barrel so the US version of the gun could be made. I considered trying to have a crack at scratch-building  some more guns, with the idea that I could hide most of my sins under  netting.

Something like this, but thicker. Source Wikicommons - click here for details.

So when Ion mentioned it in the comments section of my last post, I figured "Why Not?' With that in mind, I hunted through my collection of useful bits and started making some guns.

Spare barrels, plastic card , sprue, bent wire, and Airfix wheels on a sample Formica base.

Oh, and a toy poker chip for a turntable.

 I've always found that if I have to scratch-build something, it is just as easy to make two or more based on a simplified design, rather than make one awesome model that I can't be bothered replicating due to lack of parts or time. My LCVP project (click here for details) is a prime example of that philosophy at work.

Three WIPs and an actual assembled gun.

I thought I could use parts of a Chux cloth as the netting. This part of the plan is subject to change :)

 The part of the project that is potentially going to be the most difficult is getting the netting right. It needs to be able to obscure the gun, but not so much that what I have made is entirely unseen. Getting that balance right will be the key to making this work.

Artists medium added to base, wire poles installed and more bits added to guns.

 Fortunately, I have a few ideas on how to achieve this, and the Chux cloth is only one of a couple of possible material choices

Behold the dodgy recoil mechanism!

The gun trail - Bent wire and Liquid Green Stuff.

Another view with an actual model of the gun for comparison.

 Since I was doing work on artillery, I figured I should also dredge out my M-102 and give it a touch up and a rebasing so it can be at the same standard as my light guns. I have some Atlantic not 122mms that are also due for the same treatment.

Since I was basing guns I figured I should finish off my Britannia Models M-102 Howitzer.

Monday is looking to be a great day for painting stuff!

Airfix British M119 105mm Light Field Guns

Recently I finished off some three of the JB Models/Airfix 105mm guns. Like all the JB Model kits they were quite straightforward to make and  were flash free.

20mm Wartime Miniature included for scale.

Originally I acquired a single gun for use in building up the forces I needed to run the Goose Green scenario from one of the old GDW Command Posts, (click here to see the rest of the British land forces for that scenario) , but I increased my holdings by two more as I like the model so much, and I was trying to be able to represent more of the five batteries of L118 light guns that were deployed there.

Gun in lower elevation. 

I have opted for a generic paint and basing scheme that allows me to use the guns to represent multiple users in different campaigns, although these will primarily be used to represent either British or NZ Army guns. If I had more I would consider doing one in transit mode.

Two guns top and tail.

Unfortunately I  have recently discovered that Airfix no longer produces the kits - which is frustrating as I need to base up six for use as teaching aids! I have contacted a number of online and brick and mortar stores and been very unsuccessful in tracking more down. I am kicking myself for not buying more at the time!

S&S Models NZLAV

In November of 2013 I purchased a number of resin models from S&S Models (click here to see their shop). I had thought that I had blogged about it at the time, but apparently I hadn't.

NZLAV with some figures from Wartime Miniatures I'm working on.

By and large the S&S model kit is pretty good. The main issue being that the gun barrel isn't fluted and the muzzle adapter is wrong on the white metal supplied component. I corrected the muzzle brake with green stuff, but decided not to twist the barrel.

Still not happy with the paint job on the uniforms.

The Wartime Miniatures I wrote about here, So far I have been rather slow in painting these guys up!

Overall the S&S is a very good model of the NZLAV.

 If I do any other NZLAVs I may start to put the appropriate squadron markings on them for QAMR.

Putting crew in would be a challenge as the bulk of the turret is solid resin!

So next up I should do some guns!

S-Mars Abrams - WIP

Recently I was given a number of S-Mars kits by a friend. I have slowly been assembling them, but they are all quite awful kits with a great deal of flash and instructions that are quite lacking in any meaningful detail.

Not as advertised.

All of these factors are trumped by the fact that the description on the box doesn't actually contain the kit you get. M-60 with reactive armour? - nope, just a plain ol' M-60. Abrams with Mine Plow? - Nope, just an Abrams.

Post scraping phase.

I've taken a few shots of the assembled kit before painting to show the amount of green stuff needed to fill the gaps in the kit.

And more Green Stuff.

 The amount of trouble I have had with making this and the other S-Mars kits means that I will be avoiding them like the plague .

And yet more.....

While I accept that some kits require more work than others, it galls me that the box doesn't contain the advertised kit. Still I hope to be able to turn them into useful items on the wargaming table.

WIP Cardboard M-113

Cardboard and resin M-113

Many years ago I purchased a pdf of a 172 scale M113 from Paper Tiger Armaments. Naturally, after printing it out, I did absolutely nothing with it. Frank, on the other hand was inspired to make his own cardboard M-113s for his cultist army.

The soft cardboard underbelly of the beast.

I obtained three of his surplus hulls early last year with a view to figuring out a way of making some quick and dirty wheel and track assemblies to use on them. I figured the easiest way of making the assemblies was to create a one piece resin assembly.

A coat of paint and some stowage will make it look better!

Once I made the wheel assembly, I then glued it to the hull and repeated the process on the other side. I then put a black undercoat on the assemblies, and then started putting some Sand grey primer on one side of the model.

Undercoated track and wheel assembly.

Dry brush of sand grey primer over the track and wheel assembly.

So with a little more work, I can finish this model off, repeat the process another two times, and chalk up another project as being finished off.

EKO Set 4508 - Swiss Infantry

A group of not Swiss infantry based up for CD.

While I have been busy of late, I have found time too paint up another set of Eko figures (Click Here to see the PSR article). These were sourced through the good offices of Glenn, and I will admit I enjoyed painting them.

In CD terms this would equate to a strong rifle company of four rifle platoons, a HQ section and a patrol/recon element.

The Swiss Army of the 1970s is not a force that I could see myself getting a great deal of gaming use out of, and while painting them up in their intended scheme would have been quite pleasing, I felt that I would bring out the character of the figures more if I opted for a different scheme. With that in mind, I have gone for a scheme that should let me add them into a number of different factions that I use in my moderns games.

The BUA has lots of CD friendly places to put troops in!

I also found time to finish off two buildings that I have been working on for around two years. I figured it was either finish them, or deep six them. Now that the wife has moved up here and the unpacking has started in earnest, I should be able to set up a proper painting desk again, and get a good size table organised.

Building A: The view from above.

 I have a few more little BUAs planned as I hope by making lots of small ones, I can place them down to cover large amounts of a table in urban sprawl.

Building B: Same-Same but different!.

Perhaps I will even manage to finish off some other projects? - One can but dream!